Jump to content

V30 Language


andydub
 Share

Recommended Posts

To access this menu need enter service mode using service floppy. Also to access this menu on main board can turn on dip switch pin 2 ( then film processor always in service mode ) .

You can select only languages, which where on floppy during instillation. Part of software is on main board and other part - on LCD board. If on software do not see your process, language, or something else what you have before you need reinstall software from floppy. Floppy disk should be bootable. 

Link to comment
Share on other sites

Did you enter language selection menu? To enter there on main board can turn on dip switch pin 2. You need software only if language is missing. Need software version, where is your language. In most versions have English. Other languages are optional. It is possible to get software. Just need use version for exact process ( standard, SM, Ecojet ) . For example long time ago on standard film processor used LCD from Ecojet film processor. After replacement minilab gave error about missing tablets. Only after software instillation film processor worked properly.

Your LCD is from SM film processor. That is the reason why you see P7 and P8 errors. Need install version for standard film processor.

Edited by Minilab service
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...