Jump to content

6075-7 G Laser Controll Error. 6073-2 Synchronous Sensor error


Tahir mirza
 Share

Recommended Posts

6075-7 ( 6075-00007 ) means although one second has passed after resetting the G laser driver was stopped, laser intensity does not return to normal.
6073-2 ( 6073-00002 ) means the G laser synchronous signal does not enter within the specified period to the synchronous sensor PCB.
Try replace AOM driver. If will not be changes - need to replace G laser head. 

Link to comment
Share on other sites

9 hours ago, Minilab service said:

6075-7 ( 6075-00007 ) means although one second has passed after resetting the G laser driver was stopped, laser intensity does not return to normal.
6073-2 ( 6073-00002 ) means the G laser synchronous signal does not enter within the specified period to the synchronous sensor PCB.
Try replace AOM driver. If will not be changes - need to replace G laser head. 

I Replaced AOM Driver But no change 

Link to comment
Share on other sites

3 hours ago, PHOTOLABPART.COM said:

RESPECTED SIR 

 

PLEASE CHECK THERE POLYGON MIRROR FREQUENCY IS 2043'+-7 OR NOT ? 

SWAP AOM FROM GREEN TO RED & RED TO GREEN AND SEE 

 

THANKS 

I checked The Polygon Mirror Frequency Is 2043 and All lasers Executed.

Fuji LP-7700 have Only One AOM Driver

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...