Jump to content

Minilab 330


Recommended Posts

.gho or tib can do not work at you. All computers are different, so can be missing drivers, wrong network settings, or can be some other problems. Fuji can do not work also. Server name entered on  Frontier computer should match your server computer name. On image file it can be different.

The easiest would be to take server computer. There install Windows 2000, or Windows XP. If you are experienced it engineer then can be W7 32 bit. Prepare computer  for server instillation. Computer name should match server name, which is entered on minilab computer settings. Then set network ( working group name, IP, mask ) and check connectivity both side ( run ping )  Install C4/C5 version 5.5-0E-976 . After that on server settings register your minilab, services, devices and have working server.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...