Jump to content

Noritsu QSS-3300 Printer Manual, Software, and EZ Controller?


Lumentation
 Share

Recommended Posts

Hello everyone,

Our minilab's 3300 has been down for repairs for some time now. It's almost fixed, and we're trying to prepare to set it up properly. Does anyone know where we can find the digital software for the full set of manuals for the 3300, and the latest version of the 3300 software? Our minilab has a new computer (windows 11) that runs our EZ controller software and LS-600 scanner. Is there a way to connect the 3300 to the EZ controller so that we can use this computer to control the printer?

As always, thanks in advance! 

Link to comment
Share on other sites

First, QSS-3300 can not run directly with Windows 11, the system program run only with Windows 2000 or xp, the last version is 8.01

If you want print with EZC you need a second   pc for install EZC and software connection.

Link to comment
Share on other sites

Hace 9 horas, Willow Photo Lab dijo:

Hola a todos,

El 3300 de nuestro minilab ha estado inactivo para reparaciones desde hace algún tiempo. Está casi arreglado, y estamos tratando de prepararnos para configurarlo correctamente. ¿Alguien sabe dónde podemos encontrar el software digital para el conjunto completo de manuales para el 3300 y la última versión del software 3300? Nuestro minilab tiene una nueva computadora (windows 11) que ejecuta nuestro software de controlador EZ y el escáner LS-600. ¿Hay alguna forma de conectar el 3300 al controlador EZ para que podamos usar este ordenador para controlar la impresora?

Como siempre, ¡gracias de antemano!

you need software to network the external computer with the minilab
 
 
 
Link to comment
Share on other sites

You need two comnputers - internal minilab computer with Windows 2000 PRO and minilab system software ( the latest - version 8 ) . System software can be standard ( when minilab is with scanner - S2, S3 S4 or S1-II ) , or QSS3300PRO software ( minilab without scanner ) .

On external computer you do not need QSS3300 system software. QSS3300 system software will be only on internal minilab computer.

On W10 64 bit can work EZ controller 6.60 and latter versions. The latest is version 7.41. Version 7.41 can install, o use to upgrade previous versions.

From external computer you can pint digital orders. To print from scanner, or scan films you need from minilab internal computer. If you scanner is S1-II or S4 then you can change one board. After that scanners would be with USB. Only USB scanner can connect to new computer with EZ controller.

Yes, you can connect your minilab to computer where is connected LS-600. You can scan, or print files directly onj your minilab.

On internal minilab computer additionally need install connection software. Internal computer should work on Windows 2000 PRO.

If need I can remotelly help to install everything. I have all software and know how to install. If interested write private message.

Link to comment
Share on other sites

On 4/1/2022 at 4:08 AM, Minilab service said:

You need two comnputers - internal minilab computer with Windows 2000 PRO and minilab system software ( the latest - version 8 ) . System software can be standard ( when minilab is with scanner - S2, S3 S4 or S1-II ) , or QSS3300PRO software ( minilab without scanner ) .

On external computer you do not need QSS3300 system software. QSS3300 system software will be only on internal minilab computer.

On W10 64 bit can work EZ controller 6.60 and latter versions. The latest is version 7.41. Version 7.41 can install, o use to upgrade previous versions.

From external computer you can pint digital orders. To print from scanner, or scan films you need from minilab internal computer. If you scanner is S1-II or S4 then you can change one board. After that scanners would be with USB. Only USB scanner can connect to new computer with EZ controller.

Yes, you can connect your minilab to computer where is connected LS-600. You can scan, or print files directly onj your minilab.

On internal minilab computer additionally need install connection software. Internal computer should work on Windows 2000 PRO.

If need I can remotelly help to install everything. I have all software and know how to install. If interested write private message.

Thank you everyone for your help. And thank you for all the instructions @Minilab service, we really appreciate it. Our printer is almost fixed. When it is, I will definitely send you a private message. Thank you! 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...