uzmanfoto Posted April 6 Report Share Posted April 6 I can't fix the line problem. I changed the MLVA filter and light. Pattern 1-2-3-4 gives an error. Can't complete. How can i solve this problem. Quote Link to comment Share on other sites More sharing options...
yustas Posted April 6 Report Share Posted April 6 Did you try to replace the lamp? Quote Link to comment Share on other sites More sharing options...
kodak_service Posted April 6 Report Share Posted April 6 (edited) Please execute Load Voltage Adjustment and post a screenshot of the result. Edited April 6 by kodak_service Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted April 7 Report Share Posted April 7 RESPECTED SIR PLEASE CHEK DRIVE VOLTAGE & DATA OUTPUT PCB THANKS Quote Link to comment Share on other sites More sharing options...
uzmanfoto Posted April 7 Author Report Share Posted April 7 (edited) 18 hours ago, kodak_service said: Please execute Load Voltage Adjustment and post a screenshot of the result. Edited April 7 by uzmanfoto Quote Link to comment Share on other sites More sharing options...
kodak_service Posted April 7 Report Share Posted April 7 (edited) First you need to replace the Drive Voltage PCB J390638. If this does not help, then do the following: - clean dichroic filters - clean the integrator - replace the lamp with a new one Edited April 7 by kodak_service Quote Link to comment Share on other sites More sharing options...
uzmanfoto Posted April 7 Author Report Share Posted April 7 9 minutes ago, kodak_service said: First you need to replace the Drive Voltage PCB J390638. If this does not help, then do the following: - clean dichroic filters - clean the integrator - replace the lamp with a new one Are the voltages low? ''- clean dichroic filters - clean the integrator - replace the lamp with a new one'' I did all of these Quote Link to comment Share on other sites More sharing options...
kodak_service Posted April 7 Report Share Posted April 7 To put it simply, yes. Quote Link to comment Share on other sites More sharing options...
uzmanfoto Posted April 7 Author Report Share Posted April 7 19 minutes ago, kodak_service said: To put it simply, yes. What should the voltage values be? Quote Link to comment Share on other sites More sharing options...
kodak_service Posted April 7 Report Share Posted April 7 Minilab adjusts these voltages by itself. Their value depends on the MLVA parameters. If the drive Voltage pcb is faulty, then it cannot deliver the required voltages, so the overall color changes and uniformity deteriorates greatly. Quote Link to comment Share on other sites More sharing options...
kodak_service Posted April 7 Report Share Posted April 7 1 hour ago, uzmanfoto said: What should the voltage values be? The Drive Voltage Ajustment result is the voltages that should be at the output of this pcb (values should be divided by 10) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.