fleabag Posted May 21 Report Share Posted May 21 Could this be a light source issue? I have taken the machine apart three times to clean and check for dust so I don’t think dust is the issue. I’ve been told by a couple of people that it is the LED and some say it is not. What do you think? Quote Link to comment Share on other sites More sharing options...
Dave S Posted May 21 Report Share Posted May 21 Go to maintenance, enter the service mode (F1- F9 password 2260) Go to scanner sensitivity check Upload an image of the graph here with both the shading on and off, then maybe we can see what the issue is. Quote Link to comment Share on other sites More sharing options...
fleabag Posted May 21 Author Report Share Posted May 21 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted May 22 Report Share Posted May 22 Select LED ALL ON , SHADING ON and make first screenshot. Then select LED ALL ON , SHADING OFF and make second screenshot. Can do twice - with film carrier bottom lens and without it. Quote Link to comment Share on other sites More sharing options...
fleabag Posted May 22 Author Report Share Posted May 22 (edited) "carrier bottom lens". Are you talking about that plastic removable piece on the bottom of the carrier? Edited May 22 by fleabag Quote Link to comment Share on other sites More sharing options...
Minilab service Posted May 22 Report Share Posted May 22 Yes Quote Link to comment Share on other sites More sharing options...
davidlam Posted May 23 Report Share Posted May 23 Should there a thin adhesive diffuser on the carrier bottom lens or not for carrier to be used with HS-1800 scanner .. ? I am not sure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.