Jump to content

Is there anyone can tell me Noritsu3202 can use Fujifilm Chemical CP-49?


ABCF236
 Share

Recommended Posts

CP49 is replenishment cartridge. If your minilab is QSS3202F then you need to use this cartridge for replenishment.

CP49 is cartridge with fast process chemicals. Chemicals from cartridge instead standard chemicals might be could use if to decrease processing time ( on specification instead QSS3202 choose QSS3203 ) .

Link to comment
Share on other sites

Noritsu has processors with F specification. There to replenish used CP49 cartridges ( CP49E, CP49HV, CP49HV II ) .

CP49LR and CP49LRII are the same cartridges. Just replenishment rates are lower. Can use them, when make many prints.

F specification processors can have QSS32xx, QSS35xx, QSS37xx, QSS38xx, QSS39xx series minilabs.  CD  processing time 20 - 28 sec, BF - 20 - 28 sec , STB - 32 45 sec. Exact time depends on exact processor model.

CP43 ( CP43FAII ) is for older Fuji minilabs. It can't be used on Noritsu minilabs.

Link to comment
Share on other sites

32xx is old minilab dont have 32xxF. Fujifiil worked together for a few years with Noritsu from the 35xx (Fuji710) 37xx (fuji750/770) machine.

This chemical CP49 was created by Fujifilm for the following machines: 340/500/550/570/590.Except old digital minilabs Fuji that used cp48. Noritsu old's are 30xx, 31xx, 32xx, 33xx.  Olds machines uses CP43 or derived (temp developer 37-38). development time is long.

 

Alves

Edited by leandrocmalves
Link to comment
Share on other sites

leandrocmalves, you are wrong. As written above QSS32,  has N ( standard replenishment ) , SM ( replenishment from Kodak SM packets ) , J ( Ecojet - tablets made by Tetenal ) and F ( replenishment from Fuji CP49E cartridge ) . Open QSS32 service manual, look specifications and you see them.

Processors with F replenishment are PP-1213F and PP-1217F.
Minilabs  with F replenishment are QSS3202F, QSS3203F, QSS3211F, QSS3212F, QSS3213F, QSS3202F PRO, QSS3203F PRO, QSS3201SD F, QSS3202SD F, QSS3203SD F, QSS3202SD F PRO and QSS3203SD F PRO.

Link to comment
Share on other sites

I know a lab many years ago that ran a Noritsu 2301 and an old Fuji analogue printer which I think used CP43 chemistry. They wanted to use the Fuji chemistry on the then new Noritsu 2301, the rep rates and concentration were modified to use the much stronger chemistry, however after 2-3 years of use, the stainless steel on the BF rack on the 2301 was so corroded that the rack had to be replaced at great expense.

So them trying to save costs ended up costing them much more in the long run.

Just use the chemistry type the machine was originally designed for (assuming it is still available) otherwise you will potentially have problems further down the line, like swollen rollers corroded racks etc.

Edited by Dave S
Link to comment
Share on other sites

On 11/11/2022 at 10:23 AM, Minilab service said:

leandrocmalves, you are wrong. As written above QSS32,  has N ( standard replenishment ) , SM ( replenishment from Kodak SM packets ) , J ( Ecojet - tablets made by Tetenal ) and F ( replenishment from Fuji CP49E cartridge ) . Open QSS32 service manual, look specifications and you see them.

Processors with F replenishment are PP-1213F and PP-1217F.
Minilabs  with F replenishment are QSS3202F, QSS3203F, QSS3211F, QSS3212F, QSS3213F, QSS3202F PRO, QSS3203F PRO, QSS3201SD F, QSS3202SD F, QSS3203SD F, QSS3202SD F PRO and QSS3203SD F PRO.

Ok, sorry, in Brazil have only 3201. 

Alves

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...