Fototech Posted December 2, 2022 Report Share Posted December 2, 2022 Dear experts I am getting error W2537 The laser temperature adjustment cannot be performed because the ambient temperature is too low(high). Room temperature is around 20°C. I changed Laser temperature control pcb (the small one) but no luck. I checked power to AOM it is ok. Any ideas to help solve the problem? Quote Link to comment Share on other sites More sharing options...
Fototech Posted December 2, 2022 Author Report Share Posted December 2, 2022 This is Laser exposure check Quote Link to comment Share on other sites More sharing options...
Fototech Posted December 3, 2022 Author Report Share Posted December 3, 2022 Anyone to help please?? Quote Link to comment Share on other sites More sharing options...
leandrocmalves Posted December 4, 2022 Report Share Posted December 4, 2022 Hi... As the 3 lasers have low currents, you can start with ldd20. Alves Quote Link to comment Share on other sites More sharing options...
sanseki Posted December 25, 2022 Report Share Posted December 25, 2022 it can be ldd20 on failure or red cannon on failure Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.