Jonny Posted December 17, 2022 Report Share Posted December 17, 2022 Tình trạng máy không báo lỗi , tôi đã thay AOM , image pcb , Ram .... nhưng vẫn không thể khắc phục được , máy in 30 hình ảnh tốt và 50 hình ảnh bị lệch . Làm ơn hãy giúp tôi Dave S 1 Quote Link to comment Share on other sites More sharing options...
Dave S Posted December 18, 2022 Report Share Posted December 18, 2022 I don’t understand your language. Write in English if you want anyone to reply to your post. Jonny 1 Quote Link to comment Share on other sites More sharing options...
Jonny Posted December 18, 2022 Author Report Share Posted December 18, 2022 I'm having trouble because the image is skewed at the top as shown in the image. the printer doesn't give me an error, I changed aom, pcb igmae, but still can't fix it Quote Link to comment Share on other sites More sharing options...
Dave S Posted December 18, 2022 Report Share Posted December 18, 2022 (edited) My guess is this issue is a mechanical one. It looks like the print is stopping while the laser is exposing which is why you have those lines. Check the laser exposure advance unit, check the metal drive belt is not loose (don't touch the belt with your hands) you can loosen the screws and the springs will tension it. It could also be caused by a damaged pressure guide. Has anyone dropped it by mistake? Edited December 18, 2022 by Dave S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.