Javavid Posted January 16 Report Share Posted January 16 Hi, Any one have video how to replace pinch motor Thanks Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted January 16 Report Share Posted January 16 RESPECTED SIR IT IS VERY EASY TO REPLACE MOTOR LOOK IN THIS VIDEO TO SEE MOTOR LOCATION THERE ARE 3 SCREWS TO CHANGE MOTOR THANKS, WITH WARM REGARDS Javavid 1 Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted January 16 Report Share Posted January 16 SIR IF YOU NEED MANUAL FOR REPLACEMENT AND ADJUSTMENTS, PLEASE FEEL FREE CONTACT US MY WA IS +917383343040 ITS BIG FILE I AM NOT ABLE TO PUT HEARE THANKS Javavid 1 Quote Link to comment Share on other sites More sharing options...
Kmit Posted January 17 Report Share Posted January 17 Number 9 : [1] Disconnect the CONNECTOR. [2] Remove: • 2 SCREWS • MOTOR Javavid 1 Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted January 17 Report Share Posted January 17 RESPECTED SIR THERE IS TWO SAME MOTORS I THINK YOU CAN SWAP FOR TEST IT I WORK ON IT BEFORE 10 YEARS SO NOW I AM NOT SURE WHICH MOTOR SAME BUT I THINK PINCH MOTOR IS SAME AND YOU CAN SWAP FOR TEST Javavid 1 Quote Link to comment Share on other sites More sharing options...
Kmit Posted January 18 Report Share Posted January 18 The pinch motor is one for printer and it is the same for 605, 68xx and 70xx. The same motor is used as thermal head motor on 605 and 70xx and as capstain pinch motor on 8810. Javavid 1 Quote Link to comment Share on other sites More sharing options...
Javavid Posted January 18 Author Report Share Posted January 18 Hi, Thanks every one for reply, I have ordered new motor and will change once arrived. In the meantime I have another problem with my 6850 printer. It prints photos all YELLOW, before it was working good. Any suggestion? Thanks Quote Link to comment Share on other sites More sharing options...
Kmit Posted January 18 Report Share Posted January 18 Does the 6850 do the Yellow/Magenta/Cyan and laminate and after it goes on Ready or only the yellow and an error appears on the display? Quote Link to comment Share on other sites More sharing options...
Javavid Posted January 18 Author Report Share Posted January 18 no it prints and cuts the photo Quote Link to comment Share on other sites More sharing options...
Kmit Posted January 18 Report Share Posted January 18 1) Have you got a Kodak Kiosk or you use the 6850 with a pc (stand alone) 2)Test Print -> On the Panel : Menu -> Menu -> Test Print Mode -> Enter The test is Ok? Attach the test 3) Attach one picture with the problem 4) Check the firmware Menu Menu Menu .... Quote Link to comment Share on other sites More sharing options...
Javavid Posted February 10 Author Report Share Posted February 10 I got Mech Error 03 sorted, have to buy new pinch motor. I know in some countries people do repair faulty motors. Any one knows specs of the motor before pass on to mechanic for repair Thanks Quote Link to comment Share on other sites More sharing options...
Kmit Posted February 10 Report Share Posted February 10 The pinch motor costs around 100 euros and you change it after 100/200/300 thousand prints ... Quote Link to comment Share on other sites More sharing options...
Javavid Posted February 11 Author Report Share Posted February 11 you know what is input and output voltage etc Quote Link to comment Share on other sites More sharing options...
Márcio Caetano Posted September 26 Report Share Posted September 26 Ola bom dia! Sou o Marcio, gostaria de saber sobre o 6850, pois tenho uma e ela embola o ribon, após alguns vídeos no youtube, descobri que o sensor de leitura não está funcionando... os motores giram, logo apos um deles para e o outro continua aparece uma mensagem Ribon vazia. Sou de Araxá Minas Gerais, e aqui não tem técnico na área. Vossa Senhoria poderia me ajudar com algo? Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted September 27 Report Share Posted September 27 1. Use the diagnostics to check the operation of the PINCH ROLLER MOTOR. 2. Check that CONNECTORS CN12 - CN62 on the PINCH ROLLER MOTOR AY and the CONTROLLER BOARD AY are connected correctly. 3. If necessary, install a new PINCH ROLLER MOTOR AY. The PINCH ROLLER SENSOR AY is disconnected or malfunctioning. 1. Use the diagnostics to check the operation of the PINCH ROLLER SENSOR. 2. Check that CONNECTORS CN41 - CN71 and CN41 - CN72 on the PINCH ROLLER SENSOR AY and the JUNCTION BOARD AY are connected correctly. 3. If necessary, install a new PINCH ROLLER SENSOR AY. The CONTROLLER BOARD AY is malfunctioning. 1. Upgrade the FIRMWARE for the PRINTER. 2. If necessary, install a new CONTROLLER BOARD A Quote Link to comment Share on other sites More sharing options...
Kmit Posted September 27 Report Share Posted September 27 Are you sure that the problem is the sensor ? How much ribbon is left ? On the control pannel : Menu - Test print mode - ..... - Ribbon Remain % Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.