FOTOBINCI Posted January 21 Report Share Posted January 21 With the 13x9 cm prints and sometimes also with the 15x10 prints, the photos come out superimposed on each other. I checked and up to the cross over rack n° 5 they come out well then no, it seems that some rolls of the cross over 6 are not working well. Can someone help me perhaps with a cross-section of the racks with the list of parts that can be replaced. Thank you Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 26 Author Report Share Posted January 26 Search parts list for Fuji Frontier LP 7500 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted January 26 Report Share Posted January 26 Check lelts on bottom of racks. Often when few photo go out together rubber belts are too loose. Remove racks and look which belt is too loose. Also can check racks one by one to find from which tank photos go out together. Belt mounted on three rollers. Lower turn belt - part number A049949-01 ( rack 1 , 2 ) , A060316-01 ( rack 5, 6 ) . Belt size is the same. Different only material. Which part you need? Fuji LP-7500 is Noritsu QSS3702F. I have all documents ( manuals, disgrams, part list and other ) . Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 27 Author Report Share Posted January 27 I need the codes to be able to order the rollers of crossovers 5 and 6 which seem worn to me, since you can see light between one and the other, (until 5 the photos come out and are not superimposed) I replaced the bushings and gears and Replaced lower pivot belt so I believe it's the rollers. Among other things, I see that they are not the same as the one I have, see photos. Thank you Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 27 Author Report Share Posted January 27 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted January 27 Report Share Posted January 27 Crosovers 3 - 6 are the same. Here parts : Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 27 Author Report Share Posted January 27 Thank you, this diagram is very detailed in the one I had you can't see the reels C007827-00 which go from 4 to 6 there are two reels A050679-00 which are not described in your diagram. Thanks again Quote Link to comment Share on other sites More sharing options...
Minilab service Posted January 28 Report Share Posted January 28 I think you had part list for processor with different specificatiion, or faster processor. On my picture turn rack for your processor. Fuji LP-7500 is Noritsu QSS-3702F . Printer LP-2500G2 ( Fuji named it LP7EZ ) and processor PP-1213G2F ( Fuji named it PP-7500 ) . The same printer and processor on Noritsu QSS-3701F. It is the same minilab model working without capacity booster. Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 28 Author Report Share Posted January 28 My minilab has the LP 7500 Capacity Booster (F) for faster printing Quote Link to comment Share on other sites More sharing options...
Minilab service Posted January 28 Report Share Posted January 28 All Fuji models from LP7200 to LP7900 have boosters. I just wanna to say that Fuji LP7500, Noritsu QSS-3702F and Noritsu QSS-3701F are absolutelly the same. Fuji LP7500, Noritsu QSS-3702F have capacity booster type F and have the same printing speed. Noritsu QSS-3701F works slower, because it is without capacity booster. Quote Link to comment Share on other sites More sharing options...
FOTOBINCI Posted January 28 Author Report Share Posted January 28 Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.