Jesaa Posted February 26 Report Share Posted February 26 Can someone help me to install my 5r magazine in my qss . Really appreciated much . Quote Link to comment Share on other sites More sharing options...
Minilab service Posted February 26 Report Share Posted February 26 Set magazine code ( paper type and width ) . Enable magazine on magazine registration menu ( setup - magazine registration ) . On this menu press F and run new entered magazine registration. Do this test untill will be finished. When registration finished for this paper create print chanels and you can print customers photo. If do not know how to make print channel correctly then copy some print channel, paste it into free line and enter it. After that open new created channel and change paper width, paper length, channel name. Quote Link to comment Share on other sites More sharing options...
TAMIK Posted March 3 Report Share Posted March 3 Related to this topic - Where to find max advance setting? Our current max advance length is 457mm but I need to increase in order to print some larger sizes. I'm not sure where to look for that? Any advice appreciated. Quote Link to comment Share on other sites More sharing options...
kodak_service Posted March 3 Report Share Posted March 3 If you have a QSS-2901 minilab, then 457 mm is the maximum possible length. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.