arturo huevo duro Posted March 11 Report Share Posted March 11 someone will have ez controller without dongle the latest version that runs with windows 11 pro Quote Link to comment Share on other sites More sharing options...
Minilab service Posted March 11 Report Share Posted March 11 Any EZ controller can work without dongle. Only one version is for W11 - EZ controller version 8.0. EZ controller not enough. Also need system software, which can work on W11 ( QSS printer 19.30, scanner system software 7.10 and system software for other equipment ) . Quote Link to comment Share on other sites More sharing options...
arturo huevo duro Posted March 12 Author Report Share Posted March 12 Hace 13 horas, el servicio de Minilab dijo: Cualquier controlador EZ puede funcionar sin dongle. Solo una versión es para W11 - EZ controller versión 8.0. El controlador EZ no es suficiente. También necesita software del sistema, que puede funcionar en W11 (impresora QSS 19.30, software del sistema de escáner 7.10 y software del sistema para otros equipos). They told me that I can put the latest version of ez controller on the network for my minilab 3501 f Quote Link to comment Share on other sites More sharing options...
arturo huevo duro Posted March 12 Author Report Share Posted March 12 Hace 13 horas, el servicio de Minilab dijo: Cualquier controlador EZ puede funcionar sin dongle. Solo una versión es para W11 - EZ controller versión 8.0. El controlador EZ no es suficiente. También necesita software del sistema, que puede funcionar en W11 (impresora QSS 19.30, software del sistema de escáner 7.10 y software del sistema para otros equipos). So if I can install ez controller 8.0 for windows 11 pro or windows 10 pro to network the minilab with the ez controller? Quote Link to comment Share on other sites More sharing options...
Minilab service Posted March 12 Report Share Posted March 12 Net order minilabs can connect to EZ controller 5.0 and latter. So to 8.0 it can be connected. EZ controler version 8.0 can install on Windows 10 PRO, but only on the latest revisions. Quote Link to comment Share on other sites More sharing options...
arturo huevo duro Posted March 12 Author Report Share Posted March 12 Hace 6 horas, el servicio de Minilab dijo: Los minilaboratorios de pedidos netos pueden conectarse al controlador EZ 5.0 y posterior. Así que a 8.0 se puede conectar. La versión 8.0 del controlador EZ se puede instalar en Windows 10 PRO, pero solo en las últimas revisiones. and what is the cost of ez controller 8.0, can i install it or you would have to install it Quote Link to comment Share on other sites More sharing options...
Minilab service Posted March 12 Report Share Posted March 12 Anyone can install EZ controller. EZ controller 8.0 instillation is the same as it is on EZ controller 6.70 and all atter versions. Just enough to run setup. Checking computer requirements performed automatically during the installation of EZ controller. After checking EZ controller will be installed. Then restart computer, insert licence dongle and can work. How install EZ controller can ask your friends arche hernandez sanchez and virgilio 7u7 . Dave S 1 Quote Link to comment Share on other sites More sharing options...
TECNOR Posted March 13 Report Share Posted March 13 Excellent answer can you ask to all your friends about installation. Dave S 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.