Simon 1 Posted April 25 Report Share Posted April 25 Hi guys, I have the following question. I have a 3301 machine, I replaced the green laser gun with one from a spare laser unit. After the change, the machine generally works. Only when starting the printing, the first photo comes out green and the next ones are ok. This problem occurs every time you start printing. Is there any setting to fix this problem. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted April 25 Report Share Posted April 25 Probably need other Green laser head, or have replace Green AOM driver. Try swap Green AOM driver with Blue AOM driver. Look what will be after that. If will not be changes then problem with Green laser head. It starts to work, but with delay. Go to output check, printer, engine and turn on Green laser head. Wait untill have synchronization. After that return to printing and first print will be normal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.