David Shin Posted May 3 Report Share Posted May 3 Hi, I've been using S4 scanner with 3212 many years. I couldn't remove banding lines on blank frames or big sky images. Anyone can advise on this issues? Thanks, David Quote Link to comment Share on other sites More sharing options...
davidlam Posted May 3 Report Share Posted May 3 are you the first owner of S4 scanner and its AFC ? check rollers condition on your film carrier. If you have more than 1 film carrier, do they give the same banding lines issues on blank frames ? which country you and your S4 scanner are in ? Quote Link to comment Share on other sites More sharing options...
David Shin Posted May 3 Author Report Share Posted May 3 (edited) I'm in Las Vegas. I have another 3212. I'll try with other carrirer then let you know. Thank you for help! Edited May 3 by David Shin Quote Link to comment Share on other sites More sharing options...
David Shin Posted May 4 Author Report Share Posted May 4 18 hours ago, davidlam said: are you the first owner of S4 scanner and its AFC ? check rollers condition on your film carrier. If you have more than 1 film carrier, do they give the same banding lines issues on blank frames ? which country you and your S4 scanner are in ? It doesn't look like carrier problems. Carrier tested on other machine but it works fine without banding lines on blue sky images. Quote Link to comment Share on other sites More sharing options...
Dave S Posted May 4 Report Share Posted May 4 I'd say it's probably caused by an ageing LED light source, as they get older the LED's tend to become less stable. Try removing the lens at the bottom of the carrier, then do the light source update, sometimes scratches on the bottom lens can cause these uniformity issues on under exposed negatives. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.