fcosmin78 Posted May 13 Report Share Posted May 13 Hello everyone. Sorry to bother you again with my problems. Today, on the daily setup paper I have noticed a line. Was thinking that might be dust on the glass protecting the laser so i have wiped it with a clean cloth. Problem is that after that prints have a white banding on a side. Can please tell me what to do? Attaching photos. Thank you all! Quote Link to comment Share on other sites More sharing options...
yustas Posted May 13 Report Share Posted May 13 I doubt that dust on the laser output window is the culprit of the problem. My guess is that you have a small hair or something similar on the internal optics of the laser unit. I recommend getting help from a service engineer who knows how to access the inside of the laser unit and clean the optics inside. Quote Link to comment Share on other sites More sharing options...
kodak_service Posted May 13 Report Share Posted May 13 Adjust the position of the protective cover on the laser glass. Then remove the block with the pressure rollers to the left of the laser and find the hair there. yustas 1 Quote Link to comment Share on other sites More sharing options...
fcosmin78 Posted May 13 Author Report Share Posted May 13 Thank you all for the help and quick answer. I did like Kodak_service suggested and now all seems good. Thank you all and best wishes! Quote Link to comment Share on other sites More sharing options...
Digital printer Posted May 13 Report Share Posted May 13 The thin line was solved by cleaning the outer glass of the laser unit. But other problem occurred, double check the dust protection cover of the laser unit, doesn’t sit properly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.