FernandoLuis Posted June 13 Report Share Posted June 13 (edited) Hola, quiero iniciar la maquina, y sobre que arranca me tira estos 3 errores de laser (E-2509 E-2510 E-2511). Alguna solucion que puedan recomendar? Gracias. Edited June 13 by FernandoLuis Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 14 Report Share Posted June 14 Nesuprantu klausimo. Jei tikrai nori atsakymo - rašyk Angliškai. FernandoLuis 1 Quote Link to comment Share on other sites More sharing options...
FernandoLuis Posted June 14 Author Report Share Posted June 14 Hello, I want to start the machine, and when it starts it gives me these three laser errors (E-2509 E-2510 E-2511). Any solution you can recommend? Thank you. Quote Link to comment Share on other sites More sharing options...
FernandoLuis Posted June 14 Author Report Share Posted June 14 Hello, I want to start the machine, and when it starts it gives me these three laser errors (E-2509 E-2510 E-2511). Any solution you can recommend? Thank you. Quote Link to comment Share on other sites More sharing options...
FernandoLuis Posted June 14 Author Report Share Posted June 14 12 hours ago, Minilab service said: Nesuprantu klausimo. Jei tikrai nori atsakymo - rašyk Angliškai. Hello, I want to start the machine, and when it starts it gives me these three laser errors (E-2509 E-2510 E-2511). Any solution you can recommend? Thank you. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 14 Report Share Posted June 14 Here not laser error, but EEPROM content error on all three laser heads ( R, G and B ) . EEPROM settings are on 45D menu. Might be on LDD20 power connector missing, 5V, on LDD20 burned ( or disconnected ) fuse CP805, not working LDD20 board, or faulty EEPROMs on all three laser heads. Quote Link to comment Share on other sites More sharing options...
FernandoLuis Posted June 14 Author Report Share Posted June 14 3 hours ago, Minilab service said: Aquí no es un error de láser, sino un error de contenido de EEPROM en los tres cabezales de láser (R, G y B). Los ajustes de EEPROM están en el menú 45D. Es posible que falte el conector de alimentación LDD20, 5 V, el fusible CP805 quemado (o desconectado) del LDD20, la placa LDD20 no funcione o las EEPROM defectuosas en los tres cabezales láser. Hello, in menu 45D, I find all the values in zero. How can I locate the CP805 fuse? Quote Link to comment Share on other sites More sharing options...
Minilab service Posted June 14 Report Share Posted June 14 As written above CP805 is on LDD20 board ( 113C893919 ) . It can be fuse, or breaker. It is on side of board. A+5V written beside it. Look do you have all power suppliers on LDD20 input. 5V should be on connector LDD1 pin.1. Check do you have 5V on laser head EEPROMs - connectors LDD4, LDD5, LDD9 ( pin 1 ) . If have +5V then can be : LDD4, LDD5 and LDD9 connected bad. Almost impossible, that 3 connectors have bad connection LDD20 board is faulty ( can't read EEPROMs ) Burned all three EEPROMs ( once I had it, when printer got overvoltage ) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.