BIILEL Posted July 13 Report Share Posted July 13 Hello everyone I have this problem Fujifilm frontier 570 lp l replaced (3) LDD23Â I replaced (2) AOM BUT AFTER 300 PHOTO THE SAME PROBLEM ANY SOLUTION please Quote Link to comment Share on other sites More sharing options...
BIILEL Posted July 13 Author Report Share Posted July 13 Any one help me?? Quote Link to comment Share on other sites More sharing options...
yustas Posted July 14 Report Share Posted July 14 If you have a weak signal from the green module, you can improve it briefly with a new AOM driver, but either way, the new AOM driver will die and you will have the same problem again. I think you have a problem with the green module, but it's hard to judge that without the G Laser data. Quote Link to comment Share on other sites More sharing options...
BIILEL Posted July 14 Author Report Share Posted July 14 Pic 1 before changed the AOM PIC 2 AFTER CHANGED THE AOM PIC 3 THE SAME PROBLEMÂ Where do I find G LASER data ? Quote Link to comment Share on other sites More sharing options...
BIILEL Posted July 14 Author Report Share Posted July 14 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted July 15 Report Share Posted July 15 Faulty AOM driver can't effect how laser head works. Do not need to change. It will not help to solve a problem. G laser settings - on your last picture. On first picture G laser head doesn't work and on second picture G laser head worked normally. First from service menu try to make G laser optimal temperature adjustment ( 0522, or 454 menu ) . Look what will be after that. E-2521 error can cause faulty LDD23 board, faulty G laser head, or bad connection between them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.