Olivier Posted August 6 Report Share Posted August 6 I keep getting a cutter motor error on my noritsu and wanted to see if anyone could guide me on how to fix it. My cutter sometimes gets stuck and the machine would say that its ready to dev but the cutter would be in the way of me putting in my film. Quote Link to comment Share on other sites More sharing options...
davidlam Posted August 7 Report Share Posted August 7 Need error no. to know Left or Right cutter issue. Usually open up film loading box and clean related cutter sensors or replace them (CHEAP SENSORS). Use I/P & O/P check from service mode will help to identify Quote Link to comment Share on other sites More sharing options...
PHOTOLABPART.COM Posted August 7 Report Share Posted August 7 RESPECTED SIR PLEASE CHECK IN OUTPUT MODE MAIN MENU >CHECK >OUTPUT CHECK > LOADING > CHECK THE PRESSURE SOLENOID L AND R SOME TIME SOLENOID PROBLEM ALSO THANKS Quote Link to comment Share on other sites More sharing options...
Dave S Posted August 7 Report Share Posted August 7 The pressure roller solenoids have nothing to do with the cutter errors. In most cases the problem is due to bad connections going to the cutter home sensor for the cutter motor error, and the cutter position sensor for when the blade gets stuck in the cut position. There are 2 sensors for both sides. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.