Jump to content

Replacing connector D-SUB J390865-01


Recommended Posts

Hello, does anyone know which D-SUB connector is the one for the J390865-01 part for the Noritsu QSS-3203, I want to replace it since it is giving me serial communication & colourimeter error and the current D-SUB connector is a bit rusty so I want to replace it to see if it solves the error.

I read from the actual connector that it's from 3M and has a number: 10226. But there are so many types of D-SUB connectors with this number I am unsure which one is the right one.

Appreciate any help, thanks!

Link to comment
Share on other sites

J390865 has LVDS Centronics MDR connector. Can use some surface mounting connector with two position pins. Can be some 10226-1A10 connector ( for example 10226-1A10PE ) .

Do not think, that this connector will be bad. Never had to change it. Even if contacts rusty they will have contact. LVDS ( low voltage differential signal ) current is very low. 

Serial communication error is not related with LVDS connector. To connect colorimeter and power supply UPS used computer COM port. Check connections and computer settings ( on BIOS and Windows ) .


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...