Jump to content

DL600 issues


Recommended Posts

hi everybody i chnaged the head of my dl 600 but when i started up the messages bellows appears and all the lamps on it are blinking i appreciate any help thank's

PS  messages are

on the starup  status  starting printer   code 01000a04  then   E9902 a printer system error occured

20231024_120425 copie.jpg

20231024_120428 copie.jpg

Edited by surviving
Link to comment
Share on other sites

01000A04 - HDC_A sub fuse 1 blowout . You accidently connected flat cable to ground, or damaged something. 

A fuse of the Head Controller Board B is blown. Check that the Head FFC and connectors of the Head Unit are not stained with ink. Check head FFC, head and head controller board B .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...