Digital printer Posted November 21 Report Share Posted November 21 Can I use fuji7500 printer i/f pcb to qss 3701. Please give advice. Thanks Quote Link to comment Share on other sites More sharing options...
Minilab service Posted November 21 Report Share Posted November 21 Yes. All Fuji printers made by Noritsu are not HD. All boards are the same as on Noritsu QSS37 ( not HD ) . After board replacement need upgrade printer software and read backup ( for this board ) . I/F pcb ( older model J391391 , or newer model J391489 ) can find on Noritsu QSS35xx PLUS, QSS37 ( not HD ) , QSS3800 and Fuji LP-7xxx ( from 7000 to 7900 ) . I/F board can get from QSS35 PLUS where you got laser control pcb. Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 I can’t upgrade the software because I was not able to connect the server with the printer although the ip for the server is 1.12 and the printer is 1.11 Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 I can able to find the printer from the ouput registration but still not connected because from output registration it is showing LP7500 but my printer is qss3701 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted November 21 Report Share Posted November 21 As I told before need upgrade software. Only then instead Fuji see Noritsu. Many times did it, when on Fuji minilabs installing Noritsu software. 100 % it is possible to do it. Sometimes need to make few smart steps. Ask your board supplier to explain how to do it. I can upgrade board software remotely ( using Anydesk ) . Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 My I/f is from fuji7500. I want to install to qss37 but output not available when going to maintenance Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 24 minutes ago, Minilab service said: As I told before need upgrade software. Only then instead Fuji see Noritsu. Many times did it, when on Fuji minilabs installing Noritsu software. 100 % it is possible to do it. Sometimes need to make few smart steps. Ask your board supplier to explain how to do it. I can upgrade board software remotely ( using Anydesk ) . I didn’t buy the fuji i/f pcb. I took it from junk Fuji 7500 Quote Link to comment Share on other sites More sharing options...
Minilab service Posted November 21 Report Share Posted November 21 As I told need to make few smart steps and here instead Fuji have Noritsu. This information is not on manual. If can't find yourself I can do remotely. Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 Remotely means from the qss printer software. I already re install the qss printer software but no effect. I can find the ouput device LP7500 from ouput registration. Anyway I will find an I/F pcb for noritsu. Thank you Quote Link to comment Share on other sites More sharing options...
Digital printer Posted November 21 Author Report Share Posted November 21 3 hours ago, Minilab service said: As I told need to make few smart steps and here instead Fuji have Noritsu. This information is not on manual. If can't find yourself I can do remotely. Thank you for your help. I was able to connect and upgrade the software. Quote Link to comment Share on other sites More sharing options...
Minilab service Posted November 22 Report Share Posted November 22 Good job. I could remotely connect to your computer and on QSS Printer change minilab from Fuji to Noritsu. Do not need reinstall QSS Printer. Just change printer and upgrade system software. You did it yourself. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.