Jump to content

Lucky SA60


CesarBR

Recommended Posts

Hello guys.

Please, i need a help.

I have install the profile 4.82 in all equipaments with EZ COntroler, but in 37HD and 35 plus, does not appear the paper LUCKY Sa60 in the list profile 191.

This paper appear only in 38G and 37G.

What i need do to this appear in this equipment?

 

And another doubt.

This paper can be installed in the equipments 32/33 that used QSS software?

Link to comment
Share on other sites

For most minilabs last profile number is 187.
Profile 189 ( Crystal Archive ALBUM XS ) - only for QSS39
Profiles 190 ( Lucky SA-26 ) and 191 ( Lucky SA-60 ) - only for QSS3704G, QSS3801G and QSS39

Profiles 190 and 191 are for HD printers with new type laser units. I think these profiles can be used on older HD printers ( with old type laser units ) . To enable profiles 190 and 191 need modify profile configuration file. Need change MAX value ( 0191 instead of 0187 ) and add two lines ( 0190 and 0191 ) . Lines can copy from similar minilab configuration file. For example to enable profiles 190 and 191 on QSS3704HD can copy two lines from configuration file for QSS3704G. QSS-37HD is 1A and QSS-37G is 1E .

It is possible the same enable profiles 190 and 191 on QSS35 PLUS ( this model is 17 ) , but not sure if profile will be good. QSS35 PLUS are not HD printers.

Link to comment
Share on other sites

12 minutes ago, Minilab service said:

For most minilabs last profile number is 187.
Profile 189 ( Crystal Archive ALBUM XS ) - only for QSS39
Profiles 190 ( Lucky SA-26 ) and 191 ( Lucky SA-60 ) - only for QSS3704G, QSS3801G and QSS39

Profiles 190 and 191 are for HD printers with new type laser units. I think these profiles can be used on older HD printers ( with old type laser units ) . To enable profiles 190 and 191 need modify profile configuration file. Need change MAX value ( 0191 instead of 0187 ) and add two lines ( 0190 and 0191 ) . Lines can copy from similar minilab configuration file. For example to enable profiles 190 and 191 on QSS3704HD can copy two lines from configuration file for QSS3704G. QSS-37HD is 1A and QSS-37G is 1E .

It is possible the same enable profiles 190 and 191 on QSS35 PLUS ( this model is 17 ) , but not sure if profile will be good. QSS35 PLUS are not HD printers.

Thank you so much my friend!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100