Jump to content

Fuji frontier LP 1000P cant load paper


Chero

Recommended Posts

7-0048 means paper width guide in 1st unit does not leave from home position. Can be, that the sensor still detects home position even if the unit 1 paper width guide is driven, or the unit 1 paper width guide motor does not operate.

Go to input/output check menu (2AD3) . There test motor and sensor. During tests need doors should be closed. To see motor works, or not you can open door and block door sensors.

On DDE board check all power suppliers. Also check motor connection between motor and DDE board. 

Do not think, that you find DDE board. LP 1000P is old and rare model. If only one motor control doesn't work then can repair DDE board.

Edited by Minilab service
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100