Jump to content

Frontier 7500 with ez controller low print quality


Recommended Posts

The latest EZ controller version 8.10, QSS software version 19.30 and profile 4.82.

There are many quality adjustments on Noritsu software - paper specification registration ( select correct paper ) , black balance adjustment, brightness of the edge, highlight balance adjustment ( automatic and manual ), machine to machine variation correction, exposure adjustment, NCE, Setup Switch, paper setup. Also on EZ controller can load customized profiles ( for printer and monitor ) .

Link to comment
Share on other sites

Paper profile can select on menu where you make paper specification registration. Just need select correct number and profile. Can do it on QSS-Printer menu.
After that can do many other adjustments ( from F menu ) .
To have correct results calibration plate should be good. Better to use new ceramic calibration plate. D-MAX for standard paper should be about 2. For very good professional paper D-MAX can be up to 2.5 . 

On EZ controller profiles can load on system management - image processing setting - color management setting. There can load input profile, monitor profile and printer profile.

If need additionally can add master DSA values.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...