Jump to content

buenos dias


Eduardo C T

Recommended Posts

If you printed and picture is white then can be :
Bad chemicals
Broken AOM driver ( Blue, or Red ) .

In dark room from magazine remove piece of paper . Then bring magazine to day light. After that rewind paper ( return into paper magazine ) . Insert magazine into minilab and print any picture. Processed paper should be black ( because it got a light ) .
If processed paper is black then doesn't work AOM driver. When print is blank in most cases is faulty Blue AOM driver. When broken Red AOM driver should be error, but sometimes do not have it. You can try swap AOM drivers ( Blue with Green ) . Also can run laser test software. Then you can see, which AOM driver doesn't work.

Link to comment
Share on other sites

When print is blank in most cases is faulty Blue AOM driver. No any errors when doesn't work Blue AOM driver.

When doesn't work Red AOM driver should be synchronization error, but sometimes it is not displayed.

When doesn't work Green AOM driver print goes out Green.

Can run laser test software to see which channel doesn't work. Also can try swap AOM drivers ( Blue with Green and Red with Green ) .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100