Jump to content

Calibration Photo


YAKUB SHETH

Recommended Posts

Hello, in this folder on your dks disk, look for:
DKS/CONSTANTS/MIRES/SETTINGS/
IMAGE :etalonnage densitometre
PRINT IT ON A CALIBRATED PRINTER AND READ THE VALUES WITH AN EXTERNAL DENSITOMETER.
UNTIL YOU GET A GOOD SAMPLE
GREETINGS
HORACIO

etalonnage densitometre.PNG

Link to comment
Share on other sites

On 1/2/2024 at 3:26 AM, 750 joys said:

You probably need calibration chart 060 982 684A

Try this seller

https://minilab.fr/en/266-n060970336-charter-densitometer.html

 

12 hours ago, HORACIO said:

Hello, in this folder on your dks disk, look for:
DKS/CONSTANTS/MIRES/SETTINGS/
IMAGE :etalonnage densitometre
PRINT IT ON A CALIBRATED PRINTER AND READ THE VALUES WITH AN EXTERNAL DENSITOMETER.
UNTIL YOU GET A GOOD SAMPLE
GREETINGS
HORACIO

etalonnage densitometre.PNG

Hello Horacio.

Thank you for your help. Appreciated. 

Link to comment
Share on other sites

yakub 

I can explain to you how I did it.
from a printed image in which the gray is 100 100 100
Go to the densitometer calibration menu.
You open your dryer and place the sample on the indicator arrow.
You close the lid and hit start ok.
The transport starts and reads your photograph.
The densitometer will do the calculations.
You may have to do it more than once.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100