Jump to content

E-2460 and another trouble


Recommended Posts

Is here Fuji 340 ?

E-2460 means the registration nip motor (M309) malfunctions. Can be M309 doesn't rotate, or sensor D316 doesn't work.

Go to output check and run motor M309. If doesn't run can be broken motor, faulty nip release mechanism, blown fuse (FH28) in the PWR circuit board, faulty PDC circuit board, or bad connections. 

If motor rotates then sensor D316 does not see it. Make sure, that sensor can be opened and closed. Test sensor. Try open - close and look status. Check sensor power supply and output level ( when opened and closed ) . If sensor works, connections are good ( sensor - connector CTP3 ) then CTP board is not working.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...