Jump to content

Problem with Norisu 3202 Black line


nikos

Recommended Posts

This black line is a result of a short stop of the exposure process when the paper does not move and laser beams hit one place for a certain time so you have a black line.
I recommend you check the condition of all gears and belts of a paper exposure section for a broken part or some sort of paper debris that may stop paper movement.
And by the way:
Try to blur the eyes of the humans in the photo! What about their privacy?

Edited by yustas
Link to comment
Share on other sites

Either the drive belts are slipping on the exposure advance unit, or the the pressure for the inlet/ outlet roller is insufficient.
Try cleaning the drive belts with isopropanol alcohol.

Check the pressure guide is fitted properly and locked in on both sides.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100