Jump to content

MS 10.0 - LP7700 - N1


leandrocmalves

Recommended Posts

N1 is Fuji printer software. It is for all LP7xxx printers ( from LP7000 to LP7900 ) . Didn't see Fuji printer for W10 64 bit. Saw only versions for XP and W7 32 bit. 

N1 version 4.01 is for W7 32 bit, but it can be installed on W10 64 bit. No any errors. Try install it on any computer with W10 64 bit. Then add printer and try to run maintenance. If everything work then you can try to use it with MS01 ( need force enable LP7700 on MS01 ) .

On MS01 version 10.0 and 10.0R LP7700 is not supported. Of course is possible to force enable it, but what to do, when have not system software ( N1 ) .
On MS01 version 10 added Noritsu QSS3801GF support. Do not know how this printer should work. Might be need install standard Noritsu QSS-Printer software.

Now Fuji sells LP9700 . It is green painted Noritsu QSS3904GF. This printer system software is newer. Might be it could be used to connect LP7700. 

Noritsu has new and modern software for LP7700 . Software can be installed on W10 64 bit, or W11. When installed Noritsu software you instead of Fuji LP7700 you have green painted Noritsu QSS3704F .

Edited by Minilab service
Link to comment
Share on other sites

13 hours ago, Minilab service said:

N1 is Fuji printer software. It is for all LP7xxx printers ( from LP7000 to LP7900 ) . Didn't see Fuji printer for W10 64 bit. Saw only versions for XP and W7 32 bit. 

N1 version 4.01 is for W7 32 bit, but it can be installed on W10 64 bit. No any errors. Try install it on any computer with W10 64 bit. Then add printer and try to run maintenance. If everything work then you can try to use it with MS01 ( need force enable LP7700 on MS01 ) .

On MS01 version 10.0 and 10.0R LP7700 is not supported. Of course is possible to force enable it, but what to do, when have not system software ( N1 ) .
On MS01 version 10 added Noritsu QSS3801GF support. Do not know how this printer should work. Might be need install standard Noritsu QSS-Printer software.

Now Fuji sells LP9700 . It is green painted Noritsu QSS3904GF. This printer system software is newer. Might be it could be used to connect LP7700. 

Noritsu has new and modern software for LP7700 . Software can be installed on W10 64 bit, or W11. When installed Noritsu software you instead of Fuji LP7700 you have green painted Noritsu QSS3704F .

Today I have the MS10 running on a DE100 machine, everything works normally, do you think that if the N1 works on Windows 10 64bits, the MS would be able to print?

 

Alves

Link to comment
Share on other sites

Do not know. All my customers use Noritsu software.

Take any computer with W10 64 bit. On computer should be partitions C and D . Then install Fuji printer 4.01 ( N1 ) . Also need install Capacity booster type H software. Do not need to install anything else.

Fuji printer 4.01 installs on W10 64 bit without errors. Run Fuji Printer software and add LP7700. Then try to make printer maintenance, make test prints. 

If all works then LP7700 should work on MS01 10.0 . On MS01 version 10.0 LP7700 is disabled. It is possible to force enable it on MS01. Can do it before instillation. Not sure, if you can do it on MS01 10.0 which already installed. Probably need force enable LP7700 and make new software instillation. During instillation select server with printer support and LP7700. Can do it, only when LP7700 force enabled before instillation. On standard software you will not see LP7700, so can't select it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100