Jump to content

What do I need so that a 3202 pro can make it a 3202 pro SD?


Recommended Posts

To convert QSS3202 PRO into QSS3202 SD PRO you need PC-laser interface pcb , Switch control PCB and QSS3202 SD PRO system software.

To convert QSS3202 PRO into QSS3202 SD PRO you have :
From workstation can remove all image processing section boards. Can leave them, but they will not be used.
From computer remove 
PCI-LVDS/ARCNET pcb ( J390865 , or J391307 ) 
Into computer insert PC-laser interface pcb ( J391048 or J391266 )
Connect Switch control PCB ( J391121 or J391238 ) 
Install QSS3202 SD PRO software.

Link to comment
Share on other sites

Posted (edited)
58 minutes ago, Minilab service said:

To convert QSS3202 PRO into QSS3202 SD PRO you need PC-laser interface pcb , Switch control PCB and QSS3202 SD PRO system software.

To convert QSS3202 PRO into QSS3202 SD PRO you have :
From workstation can remove all image processing section boards. Can leave them, but they will not be used.
From computer remove 
PCI-LVDS/ARCNET pcb ( J390865 , or J391307 ) 
Into computer insert PC-laser interface pcb ( J391048 or J391266 )
Connect Switch control PCB ( J391121 or J391238 ) 
Install QSS3202 SD PRO software.

you will have the parts that are used or you will have photos or images to know what they are like and get them
Edited by arche hernandez sanchez
Link to comment
Share on other sites

1 hour ago, Minilab service said:

To convert QSS3202 PRO into QSS3202 SD PRO you need PC-laser interface pcb , Switch control PCB and QSS3202 SD PRO system software.

To convert QSS3202 PRO into QSS3202 SD PRO you have :
From workstation can remove all image processing section boards. Can leave them, but they will not be used.
From computer remove 
PCI-LVDS/ARCNET pcb ( J390865 , or J391307 ) 
Into computer insert PC-laser interface pcb ( J391048 or J391266 )
Connect Switch control PCB ( J391121 or J391238 ) 
Install QSS3202 SD PRO software.

Is the wiring such as connectors used in the 3203 pro the same as for the 3202sdpro?
 
Link to comment
Share on other sites

  • 2 months later...
El 3/3/2024 a las 17:49, el servicio de Minilab dijo:

Para convertir QSS3202 PRO en QSS3202 SD PRO, necesita una placa de circuito impreso de interfaz PC-láser, una placa de circuito impreso de control de interruptor y QSS3202 software de sistema SD PRO.

Para convertir QSS3202 PRO en QSS3202 SD PRO dispones de:
Desde la estación de trabajo se pueden quitar todas las placas de sección de procesamiento de imágenes. Puede dejarlos, pero no se utilizarán.
De la computadora, retire
la placa de circuito impreso PCI-LVDS/ARCNET (J390865 o J391307
) En la computadora, inserte la placa de circuito impreso de la interfaz PC-láser (J391048 o J391266)
Conecte la placa de circuito impreso de control del interruptor (J391121 o J391238
) Instale QSS3202 software SD PRO.

Placa J391048 o J391266 + J391049 PCB usada para noritsu para 32 33 / QSS piezas de repuesto minilab no nuevas - AliExpress

 

Usados Noritsu PC Laser Interface PCB J391048 para minilaboratorios QSS 32/37 | eBay

Link to comment
Share on other sites

Hace 1 minuto, Arche Hernandez Sanchez dijo:
I found these but I don't know which one I'm going to use since on Aliexpress they come with 2 cards in the same room and on eBay there is only one card which is the one I need, as I told you I'm not going to use a scanner
 
 
 
 
 
 
 
Link to comment
Share on other sites

You need only PC-laser interface pcb . PC-scanner interface pcb is connected to PC-laser interface pcb. You can disconnect these boards and use only one.

You need :
PC-laser interface pcb ( J391048 or J391266 ) . 
Switch control PCB ( J391121 or J391238 ) 
QSS3202 SD PRO software . 

J391049 , or J391267 need if want connect scanner. Then need software for QSS3202 SD ( not PRO ) .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100