Jump to content

Qss 3901g speed too slow?


candra

Recommended Posts

QSS-3901G can print approximately 292 (prints/hours) size 20x30 in paper 20.3

Now if you use paper 30.5  can print approximately 423 (prints/hours) size 20x30.

All this if your minilab is process normal (N) but if the minilab is process F this is more fast.

Link to comment
Share on other sites

1 hour ago, TECNOR said:

QSS-3901G can print approximately 292 (prints/hours) size 20x30 in paper 20.3

Now if you use paper 30.5  can print approximately 423 (prints/hours) size 20x30.

All this if your minilab is process normal (N) but if the minilab is process F this is more fast.

Hi,thanks for the reply.

How do I set the process from normal to fast?

Link to comment
Share on other sites

Le

2 minutes ago, TECNOR said:

Exist different type process 

Process normal (N) 

Process Cp49 this need a cartridge ( this is fast process)

So you can not change this.

 

Let say that I have the N process type machine,any idea how do I improve the current print process of only 180 prints per hour?

Link to comment
Share on other sites

I think you have problem with pc, its possible this process file very slow, if your pc have good features then can process more fast all files.

Try upgrade your pc, load last version EZC, Qss-printer and profiles.

All this can install on W10 or W11.

Link to comment
Share on other sites

1 hour ago, TECNOR said:

I think you have problem with pc, its possible this process file very slow, if your pc have good features then can process more fast all files.

Try upgrade your pc, load last version EZC, Qss-printer and profiles.

All this can install on W10 or W11.

Ah I see,I do have 2 different pcs one with an nvme ssd and one with sata ssd and they do print at different speed.

 

Thanks for replying :)

Link to comment
Share on other sites

Here repeat processing capacity ( 203 mm x305 mm - 292 prints / h ; 305 mm x 203 mm - 423 prints / h ) . When you print different pictures you can print less. Some time takes until you open images, correct them, make image processing and send to minilab.

To print faster use 305 mm paper. Make 305 x 203 prints printed on 305 paper ( instead to print 203 x 305 printed on 203 mm paper) . Print in automatic mode. Check network cable ( measure LAN transfer speed ) . At the same time send orders from few computers.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100