Jump to content

The "main belts" are not moving


Gustavo Nilson

Recommended Posts

Scanner - printer SLP-800SC is Frontier 330 minilab.

This mechanism has two motors - exit drive motor (M306) and Up/Down belt motor (M314) . Test motors from output check menu.

Both motors connected to PDC22 circuit board ( connector PDC17 ) . Motors connected through intermediate connector JSY1 . 

If exit drive motor doesn't rotate can be broken motor M306 ( Sanyo 103G770-2264 ) . The same motors M302, M303. Sanyo 103G770-2264 also used on Frontier 340 ( M302, M303, M306 ) and Frontier 390 ( M534, M551 and M552 ) .
Also can be bad connection ( connectors M306, JSY1, PDC17 ) , or not working PCD22 circuit board.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100