Jump to content

Fuji Frontier 370 gray-green color and black-and-white photo printing is greenish


Recommended Posts

First on software adjust laser position on paper. On all your tests Magenta has incorrect positions. Look at the black color. Beside it on right side you see Magenta. When position is wrong on other side is Green. 

Which software you use ( FDIA, FE, or MS ) ? What are versions? Do you have minilab ( SP2000 scanner  + LP2000SC printer : can be with FMPC, or without it ) , or only printer ( LP2000SC ) connected to FMPC?

Which paper you use ( brand and type ) ? Do you have installed profiles R? Which profile selected for your paper?


Link to comment
Share on other sites

2 hours ago, Minilab service said:

أولاً، يقوم البرنامج بضبط موضع الليزر على الورق. في جميع اختباراتك، يوجد لدى Magenta مواضع غير صحيحة. انظر إلى اللون الأسود. بجانبه على الجانب الأيمن ترى أرجواني. عندما يكون الموضع خاطئًا على الجانب الآخر يكون باللون الأخضر. 

ما هي البرامج التي تستخدمها (FDIA، FE، أو MS)؟ ما هي الإصدارات؟ هل لديك minilab (الماسح الضوئي SP2000 + الطابعة LP2000SC: يمكن أن تكون مع FMPC، أو بدونها)، أو الطابعة فقط (LP2000SC) متصلة بـ FMPC؟

ما هو الورق الذي تستخدمه (العلامة التجارية والنوع)؟ هل قمت بتثبيت التشكيلات الجانبية R؟ ما هو الملف الشخصي الذي اخترته لورقتك؟







صورة واتساب بتاريخ 2024-05-13 في 12.50.31_41cb4bdd.jpg

صورة واتساب بتاريخ 2024-05-13 في 12.50.17_01f959d2.jpg

Link to comment
Share on other sites

You have standard Fuji 370  . Server to printer connected through scanner. Do not have FMPC.
On scanner computer installed A1 version 7.7-0E-300 . Printer software - 7.7-0X-030d . 
On server installed FE software ( S2 version 3.0-0E-522 ) .
Both versions - the latest.

There are various Fuji Crystal Archive papers. They have different profiles. On scanner computer install profile data R CD . Then select correct profile for your paper.
Fuji has not special profiles for Mitsubishi Grace paper. Look paper datasheet. Might be there find information which profile need to select on Fuji.

As I wrote before on Fuji scanner computer go into maintenance menu. Thee make laser position adjustments ( rough and fine ) . No Green ( Magenta ) is incorrect. On one side see Magenta color and on other - Green color.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...