Jump to content

Reinstal firmware on Frontier 570 , after power lost during upgrade.

Recommended Posts

Hello to everyone, I have a problem with one Fuji frontier 570. I tried to make version up from 2.5 to 3.0 there is a lost of power and the machine got stocked now it's not starting anymore. I have to reinstall the firmware and I don't know how to enter mod rom to reinstall the firmware . Thanks in advance.


Link to comment
Share on other sites

Do you see printer on FMPC ? Try to ping printer. If printer IP is standard then type " ping -t " and press Enter.

If have connection - try upgrade firmware again. If not - try reset GPR23. Power off printer, turn off switch on GPR23 , wait a little and turn it on. 

Link to comment
Share on other sites

On 7/10/2024 at 1:30 AM, Minilab service said:

You can't reprogram remotely. You have not connection with printer. Need change GMC23, or reprogram flash memory ( Spansion S29GL064A90TFIR9 ) .

Do you know of a good reader/writer? Or someone with experience? Many thanks!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...