Jump to content

LS600 Error 01324 Scanner Calibration


Moodylab

Recommended Posts

01324-00000 means film is scanned although scanner calibration has never been performed. Need to make scanner calibration.

Go into service mode. Then enter into scanner sensitivity check menu. Look what you see there.

Check how works film carrier. If needed - calibrate sensors.

 

 

Link to comment
Share on other sites

11 minutes ago, Minilab service said:

01324-00000 means film is scanned although scanner calibration has never been performed. Need to make scanner calibration.

Go into service mode. Then enter into scanner sensitivity check menu. Look what you see there.

Check how works film carrier. If needed - calibrate sensors.

 

 

This is the sensitivity check

Screenshot 2024-07-08 142940.jpg

Link to comment
Share on other sites

Now IR LED value is 44. Increase it and press Set. After that IR curve should go up. If not then faulty LED unit ( no IR light ) , or something with IR CCD circuit.

Need turn ON only IR light and through mobile camera look you see light from LED, or not. On mobile should see red- brown light.  If have IR light then need check IR detection circuit.

Link to comment
Share on other sites

The reason it will not perform the scanner calibration is because there is no reading on the IR.

You can test the output of the IR by setting only IR to On in the sensitivity check, and using the camera on your phone to look at the scanning slot, it should show as a pink coloured light. You will need to put a magnet on the sensor for front cover and the side door.

I've personally never seen an LED unit totally fail on the IR, it's usually just a section that fails, So I think your problem is likely to be on the IR camera side.
Check for poor connections on the ribbon cable that goes from the scanner control PCB to the IR camera connection on top of the lens.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...
DL650
DX100