How to match paper type in setup and paper type in magazine in qss 30

[Tengi2]

Hi every one, 

I need to be sure on how to match a new paper loaded in magazine and paper type in paper or laser setup, usually when I am handled with a new brand paper I usually do emulsion number change or initial setup, sometime the results are ok, but when I read the label on the package of the new paper there are nambers called emulsion number for example 72522587 can these number be useful during setup of the paper?, if so how to use them.

[Dave S]

It's just a batch number.
If all the paper rolls have the same batch number, the colour balance between the rolls should be the same.

The colour balance will be slightly different between different batch numbers.

[Tengi2]

Ok, thank you for your feedback, now I should continue doing what I have been doing