Multiple DE100-XD Setup

[FrontierNewBee]

Hi Everyone,

First of all, thank you in advance for your help.
I want to control four DE100-XDs from a single PC. I'll set up a system with different sizes of paper on each. What do you think about this setup? Should I use MS? If so, which version should I use?

Thanks,

 

[Minilab service]

On system software you can register few printers. On MS01 print channel you can select "anyprinter" , or exact printer where you can print pictures. On one paper you can print few sizes.

If you want to use W10 x64, or W11 then need MS01 version 10.0 . To connect printer to MS01 you need connection module ( MSP80 ) . Also can install many optional modules ( from MS13 to MS21 ) .

Instead of MS01 can use third parties order print software. There are many of them.

[FrontierNewBee]

thank you for your answer, can you write some of third parties order print software. Do you have a specific hot folder that you would recommend?

[Minilab service]

Hotfolder is software to print pictures automatically. Just need to drop picture into exact folder and it will be printed on exact paper size and exact paper surface. I know only one Hotfolder software and it is Fujifilm MS13 . It works only with MS01 + DE100 printer driver + MSP80 + others optional MS software modules ( MS14 - MS21 ) .

From third parties companies are order print softwares. There are many of them. They all use DE100 printer driver. On software  can register various printers and print your orders. DE100 is one of them. Not sure, if these third parties softwares have hotfolder.

On Fuji forum can find many software names. Few examples can see here :
https://www.minilabhelp.com/index.php?/forums/topic/25053-about-de100-softwares/#comment-57699
Also on Fuji forum can find free order print software, which created this forum member.