6822-0003 error

[vegas173]

Hi everyone. 

Now i have a 6822-0003 error. And my noritsu 3101 dont print photo. But some time this error disappears and its start printing. I did data tranfer test and sometimes it ok, some tome i get "no good" everywhere (main, image processing pcb, laser control pcb). What do I need to check to solve this?

[Minilab service]

6822-0003 means image processing pcb Image data operation error = does not finish within a specified time when outputting the images from the image displaying memory to the expansion memory via image correction pcb.

Can be that unstable image processing pcb ( memory, or board itself ) or image correction pcb.

Check power suppliers on image processing section boards. Go to software version check menu. Look if ARCNET communication is good and stable ( should be OK ) . Check memory modules connections, try reinsert them. Test image processing pcb. Board can test on QSS31 and QSS29.

[vegas173]

Is there a program for testing arcnet for noritsu 3101 similar to the one for the 32 series?

[Minilab service]

When minilab has ARCNET test software then it is installed with system software.  ARCNET test software should be C:\Noritsukoki\SelfCheck . 

ARCNET test software have QSS-31##-2 series minilabs. QSS-31## series minilabs ( QSS3101 and similar ) do not have it.

On QSS3101 go to software version check menu. Look if communication is good and stable there ( should be OK ) .

Your error is about incorrect image transfer inside image processing section. Need to search what is wrong there. 

[vegas173]

I replaced the 390611 board and the connection is restored. Thanks for the explanation about selfcheck.

[Minilab service]

All correct. J390611 is image correction pcb. When board is faulty you have 6822-0003 error.