What the 🤬🤬🤬

[BIILEL]

all développez stop 

Why !?

Please help  

[Minilab service]

Developer temperature sensor is only one - P1 . P2 is BF and PS are STB . The last sensor is connected to dryer.

All these sensors are connected to CTL7 . Check connector CTL7 and intermediate connector ( ana1 ) . Check 5V power suppliers ( CTL6 pin 2, 4 and 5 ) . Check fuses on CTL23 board. Try to reset CTL23 board ( press button on this board ) . If all that will not help then change CTL23.