What type of process should I use for a Noritsu 3501i Plus? Temperature? What speed should I use?

[albertooo]

Hello.
Could you help me know the temperatures for this chemical, the speed, the booster pump.
For a noritsu 350l1 Plus.
I use this paper and these chemicals.
Also, how often do you use the developer starter?

 

[Balázsovics]

Check datasheet, you use starter once when you prepare the working tank solution
It should be 38.00 celsius for dev +-0.3
35.00 blix and stb
Time is CD 45s
             BX 45s
             STB does not really matter
You don't need starter for blix, just mix as you would with starter but just water
 

[Balázsovics]

Oookay, no datasheet anywhere, don't use lucky, it's cheap.. that's all the plus points for it, unstable, shitty color balance, reds are purple and all that, use Fuji

[albertooo]

Fuji chemical is difficult to find in Mexico and is the only solution

[sinyo]

use stater only if you mix cd for 1st time

p1 tank capacity 13.6 litre

p1 rep (cd+water mix) : 5.4 l

stater : 1,564 l

water : 6,596 l

for bf just follow instruction on box .