Fujifilm DL600 Printer need help to set up.....

[SunnyDay]

Hi everyone, I need some help.

I recently acquired a used Fujifilm DL600 printer at an auction. The computer unit came with it, but no software was installed. I’ve connected everything and powered it on, but nothing happens. I don’t know much about this printer and would appreciate help setting it up to see if it’s working. Printer photos attached.

I have a few questions:

• Where can I download the software/driver for the Fujifilm DL600?

• Do I need to install specific software before it will respond?

• Does the printer require a print head replacement or any other parts before it can print?

• Is the computer that came with it supposed to have the software preinstalled?

I’m willing to pay if anyone can help. I’m open to getting assistance via a WhatsApp video call with someone who knows how to install and configure Fujifilm minilab software and get this running. Please let me know your rate for your time.

Thanks in advance for any help!

[yustas]

Please contact me if you need any software for this model at info@minilablaser.com or DM here. 
We have all the software and manuals for ALL minilabs.
 

[Minilab service]

To register DL600 and test it is enough DL600 system software ( driver and maintenance interface ) .

To print orders can use Fujifilm software, or software from third parties companies.

Fujifilm software - MS01 ( printing server - there are versions for XP, W7 32 bit, W10 x64 ) , MSP46 ( connection module ) and optional MS modules ( from MS11 to MS21 ) .

Printer is made by Epson, but Epson software can't be used there. Epson printer has 6 colors and on DL600 has 5 colors ( one color removed ) .

[SunnyDay]

I don’t have any installation CDs that came with the printer. What’s strange is that the computer unit was supposed to have Windows 7 installed, but for some reason it has Windows XP instead.

Should I reinstall Windows 7 and then install the system software (drivers and maintenance interface), and load MS01 and MSP46? Would that setup work?

[SunnyDay]

What other printing software options can I use other than the MS01?

[Minilab service]

As I wrote before you need computer where installed DL600 system software. The latest version can install on any Windows. You can use only DL600 system software. It is necessary to use printer. When printer system software installed then you have Windows USB driver, printer maintenance software and print driver.

Printer can be connected to computer with Windows XP, W7 32 bit, or W10 64 bit. It depends on MS01 version. If you have XP then here is MS01 3.1 ( it is for XP ) . To use newer MS01 need computer with newer Windows. Might be need newer computer.

To print on DL600 can use any third parties print interface. Software uses print driver, which is part of system software.