Fuji Frontier F5000

[Nidty]

Have a steady problem on a F5000:

I-LP-2662

I-LP-2217

"Performing evaporation correction"

Please wait (max. 25 min)

Have waitet much longer but nothing happends?

Cannot pass this fault - does anybody have a solution to solve it?

[Minilab service]

F5000 printer doesn't exist. There are only LP5000 and LP5000R ( newer LP5000 revision ) .

I-LP-2217 means bad maintenance starting condition and I-LP-2662 means performing evaporation correction. Go to processor  input check menu. Make sure, that tanks have correct levels.  If all good - try restart printer and computer.

If all good, but after restart you have the same error then on maintenance menu disable eveporation correction ( select OFF ) . Also can try upgrade printer firmware to version 3.0-0X-060 .