FUJI FRONTIER 340 THE PHOTOS COME OUT WITH A WHITE BORDER

[MILTON LOVERA]

FUJI FRONTIER 340 PHOTOS COME OUT WITH THIS WHITE BORDER HOW CAN I FIX IT, ANY HELP PLEASE.

[Minilab service]

Are these white bars on paper horizontal, or vertical ( paper movement direction ) ? If to print few photos lines have the same size ( approximatelly ) ? Paper advance length is correct?

[MILTON LOVERA]

I checked the paper magazines to make sure they were the correct paper size, I checked the movement of the entire mechanism and everything is fine, I think the problem is with the laser, maybe it's misaligned.

[Minilab service]

When no answers to my questions then can't comment anything.

[MILTON LOVERA]

My apologies, the lines are vertical, and if the lines are the same size in all the 4x6 photos, then the lead length is correct.

 

Edited February 16 by MILTON LOVERA

[Minilab service]

If lines on paper are vertical and stable then check paper length. When you on 6 inch paper print 6 x 4 then length should be 102 mm . Need confirm it before position adjustment. If length is incorrect then need adjust it.

If understand correctly when you on 6 inch paper printed 6 x 4 then lines on photo are at the top and bottom. Try to make image position fine adjustment (0527 menu) . If it will not enough you have to make printer mechanical adjustments.

Check print size setup (0220 menu) . Might be you accidentally entered corrections ( upper and lower ) .