S3 standalone

[Kota]

I’m trying to run the s3 standalone and I know that I need CS-1, but would it be possible to make one from scratch?

[kodak_service]

God created the entire world from scratch. Do you want to do the same? 

[Dave S]

If you have all the circuit boards, power supplies and connecting cables from a CS-1 it's possible.

[Balázsovics]

4 hours ago, Kota said:

I’m trying to run the s3 standalone and I know that I need CS-1, but would it be possible to make one from scratch?

Brother, just get a cheap 33 series and fill it with water

[Minilab service]

Do not need water. If on QSS3301 install stand alone scanner software then used only computer and image processing section. Printer and processor will be ignored. You can disconnect, them.

Not all QSS33 series minilabs can be used. Can't be QSS3300 , or SD minilabs. They do not have image processing boards. If there QSS33 PRO model ( with image processing ) then need to add Digital ICE pcb and digital masking pcbs ( masking is optional ) .

CS1 - workstation from QSS32 and QSS34 . If CS-1 is from QSS32 PRO models, or from QSS34 then need add digital ICE pcb.

Stand alone scanner can work slower, or faster. To work faster need Capacity Booster A . It can be from Noritsu ( LPT dongle ) , or virtual ( software emulator ) .