TTLGhosty Posted March 11 Report Posted March 11 Hi Everyone! I was just wondering if anyone knew where I could source spare / replacement rubber rollers for the APS lane on the NC100AY Carrier at all? I have several that have disintegrated with age unfortunately. UK Based. Thanks in advance!
Minilab service Posted March 12 Report Posted March 12 Is 240 lane really necessary? Now APS is very rare. Nobody use it. Which rollers are disintegrated? Write positions, or upload picture where could see them. NC100A roller assemblies have Fuji part numbers 334C1026043A , 334C1026380A , 334C1026148B and 334C1026041C. You can order them from Fujifilm.
TTLGhosty Posted March 13 Author Report Posted March 13 On 3/12/2026 at 10:37 AM, Minilab service said: Is 240 lane really necessary? Now APS is very rare. Nobody use it. Which rollers are disintegrated? Write positions, or upload picture where could see them. NC100A roller assemblies have Fuji part numbers 334C1026043A , 334C1026380A , 334C1026148B and 334C1026041C. You can order them from Fujifilm. Thank you! All of the APS rollers are melted unfortunately so we are looking at replacing all of them in the carrier. Usually we use the APS mask on the MFC10AY but we've had a massive intake of APS films (one order of 30 yesterday alone) so we want to give a quicker service using the 240 lane on the NC100A.
Minilab service Posted March 13 Report Posted March 13 (edited) The most 135 and 240 lane rollers are mounted on the same shafts. NC100A roller assemblies can order from Fujifilm, but they are very expensive. One roller unit costs about 500 USD . Chinese do not make runber rings to repair Fuji film carriers. Can make rings yourself, but when they mounted on metal rod they should have exact size ( ± 0.1 mm, not too big and not too small ) . I could repair this film carrier, but need time to do it. Need send, or bringfilm carrier to London. You need to find other film carrier ( temporary scan your films ) . If you have manual film carrier and 135F mask then temporary could scan using it. Edited March 13 by Minilab service
TTLGhosty Posted March 15 Author Report Posted March 15 Thanks for your reply. Sounds like a lot of work to get them working again, I think we'll stick to the manual carrier and mask for APS.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now