Hello everyone I need QSS29 system software with EZ Controller for Noritsu QSS3300 (Windows XP) Also need ARCNET drivers Thank you

[said labo]

Hello everyone
I need QSS29 system software with EZ Controller for Noritsu QSS3300 (Windows XP)
Also need ARCNET drivers
Thank you

[Minilab service]

QSS29 system software and EZ Controller are two different things. 
QSS29 system software is to install on QSS2901 internal computer ( where is Windows 2000 PRO ) . The latest version is K001 .
EZ Controller is software to install on external computer ( any Windows - W10, W11 ) .

ARCNET drivers istalled with system software. They are different on QSS2901 and QSS3300. When you install system software you have drivers.

QSS3300 can be QSS3300i ( iBeam model ) , QSS3300 ( laser printer with scanner  ) and QSS3300 PRO ( laser printer without scanner ) .They have own software. 

To connect QSS2901 to EZ controller you need third computer with Ez Lab software :

 

To connect QSS33 series minilabs to EZ controller EZ Lab is not necessary, but need connection module. On minilab internal computrer should be Windows 2000 PRO ( not XP ) . If installed XP then need expierenced IT engineer to change Windows network settings, protections and limits. With default XP settings NET Order mode doesn't work ( due XP limits ) . When on minilab internal computer installed Windows 2000 then NET Order works without limits.

To run Ez controller and Ez Lab you need dongles. They are different.

I can help to install all that. If need help - write private message.

Edited March 25 by Minilab service

[Redar]

I have everything perfect even my Windows 2000 but I don't know how to find it inside the EZ Controller

[TECNOR]

 QSS-33 can connect directly to Ez controller, only need connection software, but for connect QSS-29 is necessary Ez Lab software.