LUT for 570

[satch]

Hi,

Since Fuji has a new CA paper, is there any new LUT for thr Fuji Frontier 570?

We are having dificulties getting "OK" when calibrating.

Besides, is the ms01 4.2 windows 10 the latest Fuji Software?

Thanks.

[Minilab service]

If you have Fujicolor Crystal Archive Type CA Paper then need select LUT H and surface ( Glossy/Lustre, or Matte ) . LUT installer R should be installed. This paper has standard density ( about 2.0 ) .

[satch]

I have the newer formulation, with the new backprint. Is this the same?

 

And yes, selected is CAP TYPE II Chrystal Archive Paper Type II - H

 

[Minilab service]

You have select correct LUT, which is for your paper.

Fujicolor Crystal Archive Digital Paper Type DPII need select LUT "I" and select surface ( Glossy/Lustre, or Matte ) . DMAX for this paper is about 2.35 .
Fujicolor Crystal Archive Type CA Paper need select LUT "H" and surface ( Glossy/Lustre, or Matte ) . DMAX for this paper is about 2.00 .