I had a problem with the Noritsu 34 Pro; it doesn't detect the door magnets.

[arturo huevo duro]

https://we.tl/t-odZ36SD2hJaOjrmF

https://drive.google.com/file/d/16aAhwJVx83UmsVAt8fFgQJGbfZOSWWTL/view?usp=sharing

 

error 1026

The magnet doesn't activate when the door is lowered; the magnets on the magazine section doors don't activate when they're closed. What should I check on the Minilab 34pro, or why isn't it detecting the door magnets?

[Minilab service]

Look where you have 24V :
24V ( TP10 on laser I/O pcb ) . Here is input from laser power supply.
24V-3 ( after 6.3 A fuse F3 on laser I/O pcb )
24V after top cover sensor  ( J/P240 pin 1 )
24V after first door sensor ( J/P240 pin 4 )
24V after second door sensor ( J/P239 pin 4 )

[arturo huevo duro]

6 hours ago, Minilab service said:

Mira donde tienes 24V :
24V (TP10 en la PCB láser de E/S). Aquí está la entrada de la fuente de alimentación láser.
24V-3 (después del fusible F3 de 6,3 A en la placa láser de I/O),
24V después del sensor superior de la tapa (J/P240 pin 1),
24V después del primer sensor de puerta (J/P240 pin 4),
24V después del segundo sensor de puerta (J/P239 pin 4).

I've already identified the source of the 24V, now my question is how do I measure each voltage?

[Minilab service]

Need measure between ground and points which I wrote above.

[arturo huevo duro]

On 15/5/2026 at 3:05, Minilab service said:

Mira donde tienes 24V :
24V (TP10 en la PCB láser de E/S). Aquí está la entrada de la fuente de alimentación láser.
24V-3 (después del fusible F3 de 6,3 A en la placa láser de I/O),
24V después del sensor superior de la tapa (J/P240 pin 1),
24V después del primer sensor de puerta (J/P240 pin 4),
24V después del segundo sensor de puerta (J/P239 pin 4).

I don't have the diagram to check which pins are which.

[Minilab service]

Beside fuse is marking. Find F3 and look if you have 24V after it.
First and last contacts are marked on boards. So you know where is J/P240 contact 1 .
To find where are J/P240 pin 4 and J/P239 pin 4 you have to count. Hope you are able to count from 1 to 4 .