the paper has uneven grey coloring. 3702

[sinyo]

i notice if i split paper vertically in middle, the right side is green and left side is more magenta.

is this normal? cause ive seen in 3101 and 3501

thanks

[sinyo]

https://ibb.co.com/Zpqy0zTG

[Dave S]

It is usually caused by uneven development.

You need to thoroughly clean the rollers in the CD rack, often the plastic centre rollers get coated with dirt causing uneven pressure. Also check the No.2 crossover rollers and the No.2 rack as well.

[sinyo]

thankyou dave for fast respon.

it's been a while i cleaned cd and bf rack. i will try clean it. all my bushings on crossover its a bit loose . i usually change all of them when print come out stick to each other

[sinyo]

@Dave Sdo i need to set Brightness of the Edge?

[Dave S]

18 minutes ago, sinyo said:

@Dave Sdo i need to set Brightness of the Edge?

Personally I've never needed to change that setting.

[Balázsovics]

You can also try image position correction to align the 3 lasers and make the gray areas actually gray and not a digital color noise
I can't see your problem from the photo you shared but definitely clean processor and if that fails we get to thinking again

[sinyo]

@Dave S@Balázsovics yesterday i tried on different printer 3801g . it has same problem , my opinion it was the bad batch on lucky paper.

yes i do laser corection.

i didnt input block c before, and i didnt know that block b cyan, ,magenta and yellow should be in the same line(3 instead of 2)

Edited June 27 by sinyo

[Dave S]

43 minutes ago, sinyo said:

@Dave S@Balázsovics yesterday i tried on different printer 3801g . it has same problem , my opinion it was the bad batch on lucky paper.

yes i do laser corection.

i didnt input block c before, and i didnt know that block b cyan, ,magenta and yellow should be in the same line(3 instead of 2)

There is a reason that paper is sold cheaply!

It's pure Luck as to what you get

[Balázsovics]

Oh so it's lucky, well in that case note the emulsion number and try to avoid it
You can still use this paper for really dark or colorful prints